Wikia

Dungeons and Dragons Wiki

SRD:Breaking and Entering

Talk0
9,564pages on
this wiki
Revision as of 15:26, August 14, 2009 by Surgo (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
This material is published under the OGL

Breaking and EnteringEdit

When attempting to break an object, you have two choices: smash it with a weapon or break it with sheer strength.

Smashing an ObjectEdit

Smashing a weapon or shield with a slashing or bludgeoning weapon is accomplished by the sunder special attack. Smashing an object is a lot like sundering a weapon or shield, except that your attack roll is opposed by the object’s AC. Generally, you can smash an object only with a bludgeoning or slashing weapon.

Armor ClassEdit

Objects are easier to hit than creatures because they usually don’t move, but many are tough enough to shrug off some damage from each blow. An object’s Armor Class is equal to 10 + its size modifier + its Dexterity modifier. An inanimate object has not only a Dexterity of 0 (–5 penalty to AC), but also an additional –2 penalty to its AC. Furthermore, if you take a full-round action to line up a shot, you get an automatic hit with a melee weapon and a +5 bonus on attack rolls with a ranged weapon.

HardnessEdit

Each object has hardness—a number that represents how well it resists damage. Whenever an object takes damage, subtract its hardness from the damage. Only damage in excess of its hardness is deducted from the object’s hit points (see Table: Common Armor, Weapon, and Shield Hardness and Hit Points; Table: Substance Hardness and Hit Points; and Table: Object Hardness and Hit Points).

Hit PointsEdit

An object’s hit point total depends on what it is made of and how big it is (see Table: Common Armor, Weapon, and Shield Hardness and Hit Points; Table: Substance Hardness and Hit Points; and Table: Object Hardness and Hit Points). When an object’s hit points reach 0, it’s ruined.

Very large objects have separate hit point totals for different sections.

Energy AttacksEdit

Acid and sonic attacks deal damage to most objects just as they do to creatures; roll damage and apply it normally after a successful hit. Electricity and fire attacks deal half damage to most objects; divide the damage dealt by 2 before applying the hardness. Cold attacks deal one-quarter damage to most objects; divide the damage dealt by 4 before applying the hardness.

Ranged Weapon DamageEdit

Objects take half damage from ranged weapons (unless the weapon is a siege engine or something similar). Divide the damage dealt by 2 before applying the object’s hardness.

Ineffective WeaponsEdit

Certain weapons just can’t effectively deal damage to certain objects.

ImmunitiesEdit

Objects are immune to nonlethal damage and to critical hits.

Even animated objects, which are otherwise considered creatures, have these immunities because they are constructs.

Magic Armor, Shields, and WeaponsEdit

Each +1 of enhancement bonus adds 2 to the hardness of armor, a weapon, or a shield and +10 to the item’s hit points.

Vulnerability to Certain AttacksEdit

Certain attacks are especially successful against some objects. In such cases, attacks deal double their normal damage and may ignore the object’s hardness.

Damaged ObjectsEdit

A damaged object remains fully functional until the item’s hit points are reduced to 0, at which point it is destroyed.

Damaged (but not destroyed) objects can be repaired with the Craft skill.

Saving ThrowsEdit

Nonmagical, unattended items never make saving throws. They are considered to have failed their saving throws, so they always are affected by spells. An item attended by a character (being grasped, touched, or worn) makes saving throws as the character (that is, using the character’s saving throw bonus).

Magic items always get saving throws. A magic item’s Fortitude, Reflex, and Will save bonuses are equal to 2 + one-half its caster level. An attended magic item either makes saving throws as its owner or uses its own saving throw bonus, whichever is better.

Animated ObjectsEdit

Animated objects count as creatures for purposes of determining their Armor Class (do not treat them as inanimate objects).

Breaking ItemsEdit

When a character tries to break something with sudden force rather than by dealing damage, use a Strength check (rather than an attack roll and damage roll, as with the sunder special attack) to see whether he or she succeeds. The DC depends more on the construction of the item than on the material.

If an item has lost half or more of its hit points, the DC to break it drops by 2.

Larger and smaller creatures get size bonuses and size penalties on Strength checks to break open doors as follows: Fine –16, Diminutive –12, Tiny –8, Small –4, Large +4, Huge +8, Gargantuan +12, Colossal +16.

A crowbar or portable ram improves a character’s chance of breaking open a door.

Table: Common Armor, Weapon, and Shield Hardness and Hit Points
Weapon or Shield Hardness HP1
Light blade 10 2
One-handed blade 10 5
Two-handed blade 10 10
Light metal-hafted weapon 10 10
One-handed metal-hafted weapon 10 20
Light hafted weapon 5 2
One-handed hafted weapon 5 5
Two-handed hafted weapon 5 10
Projectile weapon 5 5
Armor special2 armor bonus × 5
Buckler 10 5
Light wooden shield 5 7
Heavy wooden shield 5 15
Light steel shield 10 10
Heavy steel shield 10 20
Tower shield 5 20
  1. The hp value given is for Medium armor, weapons, and shields. Divide by 2 for each size category of the item smaller than Medium, or multiply it by 2 for each size category larger than Medium.
  2. Varies by material; see Table: Substance Hardness and Hit Points.

Table: Substance Hardness and Hit PointsEdit

Substance Hardness Hit Points
Paper or cloth 0 2/inch of thickness
Rope 0 2/inch of thickness
Glass 1 1/inch of thickness
Ice 0 3/inch of thickness
Leather or hide 2 5/inch of thickness
Wood or darkwood 5 10/inch of thickness
Alchemical silver 8 10/inch of thickness
Dragonhide 10 10/inch of thickness
Stone 8 15/inch of thickness
Mundane crystal 8 25/inch of thickness
Iron, steel, or deep crystal 10 30/inch of thickness
Mithral 15 30/inch of thickness
Adamantine 20 40/inch of thickness

Table: Size and Armor Class of ObjectsEdit

Size AC Modifier
Colossal –8
Gargantuan –4
Huge –2
Large –1
Medium +0
Small +1
Tiny +2
Diminutive +4
Fine +8

Table: Object Hardness and Hit PointsEdit

Object Hardness Hit Points Break DC
Rope (1 inch diam.) 0 2 23
Simple wooden door 5 10 13
Small chest 5 1 17
Good wooden door 5 15 18
Treasure chest 5 15 23
Strong wooden door 5 20 23
Masonry wall (1 ft. thick) 8 90 35
Hewn stone (3 ft. thick) 8 540 50
Chain 10 5 26
Manacles 10 10 26
Masterwork manacles 10 10 28
Iron door (2 in. thick) 10 60 28

Table: DCs to Break or Burst ItemsEdit

Strength Check to: DC
Break down simple door 13
Break down good door 18
Break down strong door 23
Burst rope bonds 23
Bend iron bars 24
Break down barred door 25
Burst chain bonds 26
Break down iron door 28
Condition DC Adjustment1
Hold portal +5
Arcane lock +10
  1. If both apply, use the larger number.

System Reference Document

Padlock This page is protected from editing because it is an integral part of the Dungeons and Dragons Wiki. Please discuss possible problems on the talk page.

Around Wikia's network

Random Wiki